Auf geht's

In den Scripts nach "point of control" suchen

Time & volume point of control / quantifytoolsWhat are TPOC & VPOC? TPOC (time point of control) and VPOC (volume point of control) are points in price where highest amount of time/volume was traded. This is considered key information in a market profile, as it shows where market participant interest was highest. Unlike full fledged market profile that shows total time/volume distribution, this script shows the points of control for each candle, plotted with a line (time) and a dot (volume). The script hides your candles/bars by default and forms a line in the middle representing candle range. In case of candles, borders will still be visible. This feature can be turned off in the settings. Volume and time data are fetched from a lower timeframe that is automatically adjusted to fit the timeframe you're using. By default, the following settings are applied: Charts <= 30 min: 1 minute timeframe Charts > 30 min & <= 3 hours : 5 minute timeframe Charts > 3 hours & <= 8 hours : 15 minute timeframe Charts > 8 hours & <= 1D: 1 hour timeframe Charts > 1D & <= 3D : 2 hour timeframe Charts > 3D: 4 hour timeframe Timeframe settings can be changed via input menu. The lower the timeframe, the more precision you get but with the cost of less historical data and slower loading time. Users can also choose which source to use for determining price for points of control, e.g. using close as source, the point of control is set to match the value of lower timeframe candle close. This could be replaced with OHLC4 for example, resulting in a point of control based on OHLC average. To identify more profound points of market participant interest, TPOC & VPOC as percentage of total time/volume thresholds can be set via input menu. When a point of control is equal to or greater than the set percentage threshold, visual elements will be highlighted in a different color, e.g. 50% VPOC threshold will activate a highlight whenever volume traded at VPOC is equal to or greater than 50% of total volume. All colors are customizable. VPOC is defined by fetching lower timeframe candle with the most amount of volume traded and using its close (by default) as a mark for point of control. For TPOC, each candle is divided into 10 lots which are used for calculating amount of closes taking place within the bracket values. The lot with highest amount of closes will be considered a point of control. This mark is displayed in the middle point of a lot: How to utilize TPOC & VPOC Example #1: Trapped market participants One or both points of control at one end of candle range (wick tail) and candle close at the other end serves as an indication of market participants trapped in an awkward position. When price runs away further from these trapped participants, they are eventually forced to cover and drive price even further to the opposite direction: Example #2: Trend initiation A large move that leaves TPOC behind while VPOC is supportive serves as an indication of a trend initiation. Essentially, this is one way to identify an event where price traded sideways most of the time and suddenly moved away with volume: Example #3: POC supported trend A trend is healthy when it's supported by a point of control. Ideally you want to see either time or volume supporting a trend:
Pine Script® Indikator
von quantifytools
50
Bearish signal using Point of Control (POC) with PAC by guruThis indicator code helps traders identify potential sell opportunities using several important technical indicators: Point of Control (POC) – This is the price level where the most volume was traded over the past several days. Previous Day's Low – This shows the lowest price reached during the previous day. PAC (Price Action Channel) EMA – These are two moving averages (one based on the low price and one based on the close price) that help determine if the price is trending within a certain range. Volume SMA – This is a 3-day simple moving average (SMA) of volume, which helps filter out signals based on market activity. What the Script Does: Point of Control (POC): The script looks at the last 50 days (configurable) and calculates which price level had the highest trading volume. It then plots a red line on the chart at the POC level. This is important because it helps identify areas where there was strong market interest in the past. Volume Moving Average: The script calculates a 3-day SMA of volume, but it excludes the current day to avoid premature signals based on today’s trading. The volume SMA is used to ensure there’s enough market activity (with a threshold set to 25 units) before triggering a sell signal. Price Action Channel (PAC) EMA: The PAC consists of two exponential moving averages (EMAs): The PAC Low EMA: This is based on the low prices over the last 34 periods (configurable). The PAC Close EMA: This is based on the closing prices over the last 34 periods. These EMAs help determine if the price is trending above or below certain price levels. Sell Signal Logic: The script checks three conditions before displaying a "Sell" signal: Price Below POC and Previous Day’s Low: The close price must be below both the Point of Control (POC) and the previous day's low. Volume SMA Above 25: The 3-day volume SMA must be greater than 25. This ensures the signal only triggers when there’s enough trading volume in the market. Today’s Low is Above PAC EMAs: Today's low price must be above both the PAC low EMA and the PAC close EMA. This prevents sell signals when prices are already significantly below the PAC, indicating possible exhaustion in the downtrend. If all three conditions are met, the script will display a red "Sell" label on the chart, signaling a potential selling opportunity. No Sell Signal if Price Reverses: If the price crosses back above the POC or the previous day's low, the script will remove the sell signal and reset for a new opportunity. Summary of Conditions: For the script to display a "Sell" label: The close price must be below the Point of Control (POC) and the previous day’s low. The 3-day volume SMA (excluding today) must be greater than 25 units. The low price of the current day must be above both the PAC low EMA and the PAC close EMA. If these conditions are met, a red sell label appears on the chart as a potential signal for a short (sell) trade.
Pine Script® Indikator
von Guru7208
Rolling Point of Control (POC) [AlgoAlpha]Enhance your trading decisions with the Rolling Point of Control (POC) Indicator designed by AlgoAlpha! This powerful tool displays a dynamic Point of Control based on volume or price profiles directly on your chart, providing a vivid depiction of dominant price levels according to historical data. 🌟📈 🚀 Key Features: Profile Type Selection: Choose between Volume Profile and Price Profile to best suit your analysis needs. Adjustable Lookback Period: Modify the lookback period to consider more or less historical data for your profile. Customizable Resolution and Scale: Tailor the resolution and horizontal scale of the profile for precision and clarity. Trend Analysis Tools: Enable trend analysis with the option to display a weighted moving average of the POC. Color-Coded Feedback: Utilize color gradients to quickly identify bullish and bearish conditions relative to the POC. Interactive Visuals: Dynamic rendering of profiles and alerts for crossing events enhances visual feedback and responsiveness. Multiple Customization Options: Smooth the POC line, toggle profile and fill visibility, and choose custom colors for various elements. 🖥️ How to Use: 🛠 Add the Indicator: Add the indicator to favorites and customize settings like profile type, lookback period, and resolution to fit your trading style. 📊 Market Analysis: Monitor the POC line for significant price levels. Use the histogram to understand price distributions and locate major market pivots. 🔔 Alerts Setup: Enable alerts for price crossing over or under the POC, as well as for trend changes, to stay ahead of market movements without constant chart monitoring. 🛠️ How It Works: The Rolling POC indicator dynamically calculates the Point of Control either based on volume or price within a user-defined lookback period. It plots a histogram (profile) that highlights the level at which the most trading activity has occurred, helping to identify key support and resistance levels. Basic Logic Overview: - Data Compilation: Gathers high, low, and volume (if volume profile selected) data within the lookback period. - Histogram Calculation: Divides the price range into bins (as specified by resolution), counting hits in each bin to find the most frequented price level. - POC Identification: The price level with the highest concentration of hits (or volume) is marked as the POC. - Trend MA (Optional): If enabled, the indicator plots a moving average of the POC for trend analysis. By integrating the Rolling Point of Control into your charting toolkit, you can significantly enhance your market analysis and potentially increase the accuracy of your trading decisions. Whether you're day trading or looking at longer time frames, this indicator offers a detailed, customizable perspective on market dynamics. 🌍💹
Pine Script® Indikator
von AlgoAlpha
13
Volume Points of Control and No Control [NariCapitalTrading]Overview: The "Volume Points of Control and No Control" (VPOC/VPONC) is a trading indicator/concept I designed to identify key price levels based on volume activity. It shows (on the price label on the y-axis) where there was the most (red) and the least (blue) volume over a specified lookback period. Read below for interpretation. Key Features: Identifies key price levels based on volume Customizable lookback period and trade timeframe Plots Volume Point of Control (VPOC) and Volume Point of No Control (VPONC) Inputs and Calculations: Custom Trade Timeframe: Allows users to set the desired timeframe for analysis (e.g., Daily, Weekly). Lookback Period: Users can specify the period over which to analyze volume data. VPOC Calculation: Determines the price level with the highest volume within the lookback period. VPONC Calculation: Finds the price level with the lowest volume within the lookback period. Indicator Usage: The VPOC is considered a significant level where traders have shown the most interest, often acting as a strong support or resistance level. The VPONC, conversely, is a concept I made up. It represents a price level where 1) in an trending market, this price was accepted quickly, thus suggesting continuation of an trend. 2) price retracements will typically revisit thinly-traded price areas, the VPONC can sometimes signal an area of support in a downtrend. Chart Representation: VPOC Label: Plotted on the y-axis in red, indicating the price level with the highest volume. VPONC Label: Displayed on the y-axis in blue, showing the price level with the least volume. These labels are dynamically updated based on the user-specified lookback period and trade timeframe.
Pine Script® Indikator
von NariCapitalTrading
1
RSI with Trend LinesThe RSI with Trend Lines indicator is a tool designed to analyze the behavior of the Relative Strength Index (RSI) combined with dynamic trend lines. This indicator not only provides the standard RSI reading but also identifies pivot points on the RSI and draws bullish and bearish trend lines based on these points. It also includes customizable options for adjusting trend lines, displaying the RSI moving average, and highlighting key levels such as overbought, oversold, and the center line. This indicator is ideal for finding and identifying clear trends in the RSI and taking advantage of market breakout or consolidation signals. It also includes a table with the POC value, which represents the price level at which the most trading activity has occurred, indicating the highest liquidity and highest trading volume. Key Features: 1. Basic RSI: • Calculates the RSI using a configurable period length (default 14). • Colors the RSI based on its direction (green for rising, red for falling) and its position relative to the center line (50). 2. Key Levels: • Displays overbought (70 and 80), oversold (20 and 30), and the center line (50) levels for easy visual interpretation. 3. RSI Moving Average: • Enables and configures an RSI moving average (SMA, EMA, WMA, or ALMA) to smooth out fluctuations and detect clearer trends. 4. Dynamic Trend Lines: • Identifies pivot points on the RSI and draws bullish and bearish trend lines. • Trend lines can be extended into the future or limited to the visible range. • Includes options to display broken lines (trends that are no longer valid) and customize the style (solid or dashed). 5. Pivot Points: • Displays the high and low pivot points on the chart for a better understanding of trend changes. 6. Advanced Customization: • Adjust the pivot point period. • Control the number of pivot points to consider for trend lines. • Customize the line thickness and style. How to Use the Indicator: 1. RSI Interpretation: • Overbought Zone (RSI > 70): Indicates that the asset may be overvalued and could correct downward. • Oversold Zone (RSI < 30): Suggests that the asset may be undervalued and could rebound. • Centerline Crossover (50): A cross above 50 indicates bullish strength, while a cross below suggests weakness. 2. Trend Lines: • Bullish Lines: Drawn when the RSI forms ascending low pivot points. These lines represent dynamic support. • Bearish Lines: These are drawn when the RSI forms descending high pivot points. These lines represent dynamic resistance. • Broken Lines: When a trend line becomes invalid (the RSI breaks the line), they are displayed in a dotted style to highlight the breakout. 3. Possible Trading Signals: • Buy: When the RSI breaks an upward downtrend line. • Sell: When the RSI breaks a downward uptrend line. • Trend Confirmation: When the RSI stays within a valid trend line, it suggests that the current trend is strong. 4. A chart with the POC value: • The point of control is a price level at which the highest trading volume occurs in a given time period. It is a key component of the Volume Profile indicator, which displays volume by price. • Use of the POC in trading: • The POC is used to identify areas of high interest and liquidity for trading. • The POC provides information about the equilibrium point where buyers and sellers are most evenly matched. • Therefore, it can be considered a zone of interest, meaning it can act as support or resistance.
Pine Script® Indikator
von OskarGallard
17
Dynamic Point of Control (POC)The Dynamic Point of Control (POC) indicator provides traders and analysts with insightful information about price levels, volume distribution, and sentiment within a specified historical range. Instant Updates : POC recalculates with every new bar, keeping you ahead of the game. Market Bias : Assess market sentiment through bullish volume share. Customization : Tailor inputs to match your unique trading strategy. Chart Presence : See POC and related data graphically on your price chart. How to Use : Traders can use the Dynamic POC indicator to identify Point of Control price level, understand volume distribution, and gauge market sentiment. The indicator's visual cues and customizable parameters make it a valuable tool for technical analysis and decision-making.
Pine Script® Indikator
von tkarolak
1
Volume Profile Auto POC📌 Overview Volume Profile Auto POC is a trend-following strategy that uses the automatically calculated Point of Control (POC) from the volume profile, combined with ATR zones, to capture reversals and breakouts. By basing decisions on volume concentration, it dynamically visualizes the price levels most watched by market participants. ⚠️ This strategy is provided for educational and research purposes only. Past performance does not guarantee future results. 🎯 Strategy Objectives Automatically detect the volume concentration area (POC) to improve entry accuracy Optimize risk management through ATR-based volatility adjustment Provide early and consistent signals when trends emerge ✨ Key Features Automatic POC Detection : Updates the volume profile over a defined lookback window in real time ATR Zone Integration : Defines a POC ± 0.5 ATR zone to clarify potential reversals/breakouts Visual Support : Plots the POC line and zones on the chart for intuitive decision-making 📊 Trading Rules Long Entry: Price breaks above the POC + 0.5 ATR zone Volume is above average to support the breakout Short Entry: Price breaks below the POC - 0.5 ATR zone Volume is above average to support the downside move Exit (or Reverse Position): Price returns to the POC area Or touches the ATR band ⚙️ Trading Parameters & Considerations Indicator Name: Volume Profile Auto POC Parameters: Lookback Bars: 50 Bins for Volume Profile: 24 ATR Length: 14 ATR Multiplier: 2.0 🖼 Visual Support POC line plotted in red POC ± 0.5 ATR zone displayed as a semi-transparent box ATR bands plotted in blue for confirmation 🔧 Strategy Improvements & Uniqueness This strategy is inspired by traditional Volume Profile + ATR analysis, while adding the improvement of a sliding-window mechanism for automatic POC updates. Compared with conventional trend-following approaches, its strength lies in combining both price and volume perspectives for decision-making. ✅ Summary Volume Profile Auto POC automatically extracts key market levels (POC) and combines them with ATR-based zones, providing a responsive trend-following method. It balances clarity with practicality, aiming for both usability and reproducibility. ⚠️ This strategy is based on historical data and does not guarantee future profits. Always use proper risk management when applying it.
Pine Script® Indikator
von PakunFX
Volume Point of Control with Fib Based Profile🍀Description: This indicator is a comprehensive volume profile analysis tool designed to identify key price levels based on trading activity within user-defined timeframes. It plots the Point of Control (POC), Value Area High (VAH), and Value Area Low (VAL), along with dynamically calculated Fibonacci levels derived from the developing period's range. It offers extensive customization for both historical and developing levels. 🍀Core Features: Volume Profiling (POC, VAH, VAL): Calculates and plots the POC (price level with the highest volume), VAH, and VAL for a selected timeframe (e.g., Daily, Weekly). The Value Area percentage is configurable. 70% is common on normal volume profiles, but this script allows you to configure multiple % levels via the fib levels. I recommend using 2 versions of this indicator on a chart, one has Value Area at 1 (100% - high and low of lookback) and the second is a specified VA area (i.e. 70%) like in the chart snapshot above. See examples at the bottom. Historical Levels: Plots POC, VAH, and VAL from previous completed periods. Optionally displays only "Unbroken" levels – historical levels that price has not yet revisited, which can act as stronger magnets or resistance/support. The user can manage the number of historical lines displayed to prevent chart clutter. Developing Levels: Shows the POC, VAH, and VAL as they form in real-time during the current, incomplete period. This provides insight into intraday/intra-period value migration. Dynamic Fibonacci Levels: Calculates and plots Fibonacci retracement/extension levels based dynamically on the range between the developing POC and the developing VAH/VAL. Offers 8 configurable % levels above and below POC that can be toggled on/off. Visual Customization: Extensive options for colors, line styles, and widths for all plotted levels. Optional gradient fill for the Value Area that visualizes current price distance from POC - option to invert the colors as well. Labels for developing levels and Fibonacci levels for easy identification. 🍀Characteristics: Volume-Driven: Levels are derived from actual trading volume, reflecting areas of high participation and price agreement/disagreement. Timeframe Specific: The results are entirely dependent on the chosen profile timeframe. Dynamic & Static Elements: Developing levels and Fibs update live, while historical levels remain fixed once their period closes. Lagging (Historical) & Potentially Leading: Historical levels are based on the past, but are often respected by future price action. Developing levels show current dynamics. 🍀How to Use It: Identifying Support & Resistance: Historical and developing POCs, VAHs, and VALs are often key areas where price may react. Unbroken levels are particularly noteworthy. Market Context & Sentiment: Trading above the POC suggests bullish strength/acceptance of higher prices, while trading below suggests bearishness/acceptance of lower prices. Entry/Exit Zones: Interactions with these levels (rejections, breakouts, tests) can provide potential entry or exit signals, especially when confirming with other analysis methods. Dynamic Targets: The Fibonacci levels calculated from the developing POC-VA range offer potential intraday/intra-period price targets or areas of interest. Understanding Value Migration: Observing the movement of the developing POC/VAH/VAL throughout the period reveals where value is currently being established. 🍀Potential Drawbacks: Input Sensitivity: The choice of timeframe, Value Area percentage, and volume resolution heavily influences the generated levels. Experimentation is needed for optimal settings per instrument/market. (I've found that Range Charts can provide very accurate volume levels on TV since the time element is removed. This helps to refine the accuracy of price levels with high volume.) Volume Data Dependency: Requires accurate volume data. May be less reliable on instruments with sparse or questionable volume reporting. Chart Clutter: Enabling all features simultaneously can make the chart busy. Utilize the line management inputs and toggle features as needed. Not a Standalone Strategy: This indicator provides context and key levels. It should be used alongside other technical analysis tools and price action reading for robust decision-making. Developing Level Fluctuation: Developing POC/VA/Fib levels can shift considerably, especially early in a new period, before settling down as more volume accumulates and time passes. 🍀Recommendations/Examples: I recommend have this indicator on your chart twice, one has the VA set at 1 (100%) and has the fib levels plotted. The second has the VA set to 0.7 (70%) to highlight the defined VA. Here is an example with 3 on a chart. VA of 100%, VA of 80%, and VA of 20%
Pine Script® Indikator
von ShamrockShane
2
Moving point of controlLibrary "moving_poc" method getMovingPoc(averagePriceByVolumeHistory, ltfVolumeSerie, ltfPriceSerie, nbBarsToLookback)   Volume point of control (PoC) extracted from lower time frame data and previous time period   Namespace types: array   Parameters:      averagePriceByVolumeHistory (array) : An array of float to record previous PoC average      ltfVolumeSerie (array) : Source of volume for the lower timeframe (ltf)      ltfPriceSerie (array) : Source of price for the lower timeframe      nbBarsToLookback (int) : A number of bars determining the lookback period of this PoC   Returns: Serie of PoC
Pine Script® Bibliothek
von sleptongems
Point of Control V2 The genesis of this project was to create a POC library that would be available to deliver volume profile information via pine to other scripts of indicators and strategies. This is a republish of an invite only script to open access This is the indicator version of the library function. A few points of significance: - Allows the choice of reset of the study period, day/week or bars. This is simple enough to expand to other conditions - Bar count resets starting from the beginning of the data set (bar index =0) vs bars back from the end of the data set - A 'period' in this context is the time between resets - the start of the POC (eg. start of Day or Week) until it resets (for example at the beginning of a next day or week) - Automates the determination of the increment level rather than the user specifying ticks or price brackets - Does not allow for setting the # of rows and then calculating the implied price increment levels - When a period is complete it is often useful to look back at the POCs of historical periods, or extend them forward. - This script will find the historical POCs around the current price and display them rather than extend all the historical POC lines to the right - This script also looks across all the period POCs and identifies the master POC or what I call the Grand POC, and also the next 3 runner up POCs This indicator is also available as a library. BINANCE:BTCUSDT NSE:NIFTY OANDA:XAUUSD NASDAQ:AAPL TVC:USOIL
Pine Script® Indikator
von JohnBaron
30
Point Of ControlStrategy and indicators are explained on the Chart. Here's how i read the chart. Entry: 1. Let the price close above the Ichimoku cloud 2. Price is above Volume Support zone 2. Make sure that momentum indicated with Green Triangles for Long Position Exit: 1. Orange cross at the bottom of the candle indicates price is about to weaken 2. Best time to exit is Volume Resistance + Bearish(Hammer or Engulf ) PS: Use it along with R-Smart for better results
Pine Script® Indikator
von VebhaInvesting
18
Enhanced Volume Profile█ OVERVIEW The Enhanced Volume Profile (EVP) is an indicator designed to plot a volume profile on the chart based on either the visible chart range or a fixed lookback period. The script helps analyze the distribution of volume at different price levels over time, providing insights into areas of high trading activity and potential support/resistance zones. █ KEY FEATURES 1. Visible Chart Range vs. Fixed Lookback Depth Visible Chart Range - Default analysis mode - Calculates profile based on visible portion of the chart - Dynamically updates with chart view changes Fixed Lookback Depth - Optional alternative to visible range - Uses specified number of bars (10-3000) - Provides consistent analysis depth - Independent of chart view 2. Custom Resolution Auto-Resolution Mode Automatically selects timeframes based on chart's current timeframe: ≤ 1 minute: Uses 1-minute resolution ≤ 5 minutes: Uses 1-minute resolution ≤ 15 minutes: Uses 5-minute resolution ≤ 1 hour: Uses 5-minute resolution ≤ 4 hours: Uses 15-minute resolution ≤ 12 hours: Uses 15-minute resolution ≤ 1 day: Uses 1-hour resolution ≤ 3 days: Uses 2-hours resolution ≤ 1 week: Uses 4-hours resolution Custom Resolution Override Optional override of auto-resolution system Provides control over data granularity Must be lower than or equal to chart's timeframe Falls back to auto-resolution if validation fails 3. Volume Profile Resolution Adjustable number of points (10-400) Controls profile granularity Higher resolution provides more detail Balance between precision and performance 4. Point of Control (PoC) Identifies price level with highest traded volume Optional display with customizable appearance Adjustable line thickness (1-30) Configurable color 5. Value Area (VA) Shows price range of majority trading volume Adjustable coverage (5-95%), default is 68% Customizable boundary lines Configurable lines color and thickness (1-20) █ INPUT PARAMETERS Lookback Settings Use Visible Chart Range - Default: true - Calculates profile based on visible bars - Ideal for focused analysis Fixed Lookback Bars - Range: 10-3000 - Default: 200 - Used when visible range is disabled Resolution Settings Enable Custom Resolution - Default: false - Overrides auto-resolution Custom Resolution - Default: 1-minute - Changes automatically when "Enable Custom Resolution" is disabled Volume Profile Appearance Profile Resolution - Range: 10-400 - Default: 200 - Controls detail level Profile Width Scale - Range: 1-50 - Default: 15 - Adjusts profile width Right Offset - Range: 0-500 - Default: 20 - Controls spacing from price bars Profile Fill Color - Default: #5D606B (70% transparency) Point of Control Settings Show Point of Control - Default: true - Toggles PoC visibility PoC Line Thickness - Range: 1-30 - Default: 1 PoC Line Color - Default: Red Value Area Settings Show Value Area - Default: true - Toggles VA lines Value Area Coverage - Range: 5-95% - Default: 68% Value Area Line Color - Default: Blue Value Area Line Thickness - Range: 1-20 - Default: 1 █ TECHNICAL IMPLEMENTATION DETAILS Exceeding Bars Management The script dynamically adjusts the number of bars used in the volume profile calculation based on the selected timeframe and the maximum allowed bars (max_bars_back). If the total number of bars exceeds the predefined threshold (6000 bars), the script reduces the lookback period (lookback_bars) by trimming some of the historical data, ensuring the chart does not become overloaded with data. The adjustment is made based on the ratio of bars per candle (bars_per_candle), ensuring that the volume profile remains computationally efficient while maintaining its relevance. █ EXAMPLE USE CASES 1. Visible Range Mode For analyzing a recent trend and focusing on only the visible part of the chart, enabling the "Use Visible Chart Range" option calculates the profile based on the current view, without considering historical data outside the visible area. 2. Fixed Lookback Depth For analyzing a specific period in the past (e.g., the last 200 bars), disabling the visible range and setting a fixed lookback depth of 200 bars ensures the profile always considers the last 200 bars, regardless of the visible range. 3. Custom Resolution If there’s a need for greater control over the timeframe used for volume profile calculations (e.g., using a 5-minute resolution on a 15-minute chart), enabling custom resolution and setting the desired timeframe provides this control. HAPPY TRADING ✌️
Pine Script® Indikator
von kv4coins
9
Volume Profile Free Pro (25 Levels Value Area VWAP) by RRBVolume Profile Free Pro by RagingRocketBull 2019 Version 1.0 All available Volume Profile Free Pro versions are listed below (They are very similar and I don't want to publish them as separate indicators): ver 1.0: style columns implementation ver 2.0: style histogram implementation ver 3.0: style line implementation This indicator calculates Volume Profile for a given range and shows it as a histogram consisting of 25 horizontal bars. It can also show Point of Control (POC), Developing POC, Value Area/VWAP StdDev High/Low as dynamically moving levels. Free accounts can't access Standard TradingView Volume Profile, hence this indicator. There are 3 basic methods to calculate the Value Area for a session. - original method developed by Steidlmayr (calculated around POC) - classical method using StdDev (calculated around the mean VWAP) - another method based on the mean absolute deviation (calculated around the median) POC is a high volume node and can be used as support/resistance. But when far from the day's average price it may not be as good a trend filter as the other methods. The 80% Rule: When the market opens above/below the Value Area and then returns/stays back inside for 2 consecutive 30min periods it has 80% chance of filling VA (like a gap). There are several versions: Free, Free Pro, Free MAX. This is the Free Pro version. The Differences are listed below: - Free: 30 levels, Buy/Sell/Total Volume Profile views, POC - Free Pro: 25 levels, +Developing POC, Value Area/VWAP High/Low Levels, Above/Below Area Dimming - Free MAX: 50 levels, packed to the limit Features: - Volume Profile with up to 25 levels (3 implementations) - POC, Developing POC Levels - Buy/Sell/Total/Side by Side View modes - Side Cover - Value Area, VAH/VAL dynamic levels - VWAP High/Low dynamic levels with Source, Length, StdDev as params - Show/Hide all levels - Dim Non Value Area Zones - Custom Range with Highlighting - 3 Anchor points for Volume Profile - Flip Levels Horizontally - Adjustable width, offset and spacing of levels - Custom Color for POC/VA/VWAP levels and Transparency for buy/sell levels Usage: - specify max_level/min_level for a range (required in ver 1.0/2.0, auto/optional in ver 3.0 = set to highest/lowest) - select range (start_bar, range length), confirm with range highlighting - select mode Value Area or VWAP to show corresponding levels. - flip/select anchor point to position the buy/sell levels, adjust width and spacing as needed - select Buy/Sell/Total/Side by Side view mode - use POC/Developing POC/VA/VWAP High/Low as S/R levels. Usually daily values from 1-3 days back are used as levels for the current day. - Green - buy volume of a specific price level in a range, Red - sell volume. Green + Red = Total volume of a price level in a range There's no native support for vertical histograms in Pinescript (with price axis as base) Basically, there are 4 ways to plot a series of horizontal bars stacked on top of each other: 1. plotshape style labeldown (ver 0 prototype discarded) - you can have a set of fixed width/height text labels consisting of a series of underscores and moving dynamically as levels. Level offset controls visible length. - you can move levels and scale the base width of the volume profile histogram dynamically - you can calculate the highest/lowest range values automatically. max_level/min_level inputs are optional - you can't fill the gaps between levels/adjust/extend width, height - this results in a half baked volume profile and looks ugly - fixed text level height doesn't adjust and looks bad on a log scale - fixed font width also doesn't scale and can't be properly aligned with bars when zooming 2. plot style columns + hist_base (ver 1.0) - you can plot long horizontal bars using a series of small adjacent vertical columns with level offsets controlling visible length. - you can't hide/move levels of the volume profile histogram dynamically on each bar, they must be plotted at all times regardless - you can't delete the history of a plot. - you can't scale the base width of the volume profile histogram dynamically, can't set show_last from input, must use a preset fixed width for each level - hist_base can only be a static const expression, can't be assigned highest/lowest range values automatically - you have to specify max_level/min_level manually from input - you can't control spacing between columns - there's an equalizer bar effect when you zoom in, and solid bars when you zoom out - using hist_base for levels results in ugly load/redraw times - give it 3-5 sec to finalize its shape after each UI param change - level top can be properly aligned with another level's bottom producing a clean good looking histogram - columns are properly aligned with bars automatically 3. plot style histogram + hist_base (ver 2.0) - you can plot long horizontal bars using a series of small vertical bars (horizontal histogram) instead of columns. - you can control the width of each histogram bar comprising a level (spacing/horiz density). Large enough width will cause bar overlapping and give level a "solid" look regardless of zoom - you can only set width <= 4 in UI Style - custom textbox input is provided for larger values. You can set width and plot transparency from input - this method still uses hist_base and inherits other limitations of ver 2.0 4. plot style lines (ver 3.0) - you can also plot long horizontal bars using lines with level offsets controlling visible length. - lines don't need hist_base - fast and smooth redraw times - you can calculate the highest/lowest range values automatically. max_level/min_level inputs are optional - level top can't be properly aligned with another level's bottom and have a proper spacing because line width uses its own units and doesn't scale - fixed line width of a level (vertical thickness) doesn't scale and looks bad on log (level overlapping) - you can only set width <= 4 in UI Style, a custom textbox input is provided for larger values. You can set width and plot transparency from input Notes: - hist_base for levels results in ugly load/redraw times - give it 3-5 sec to finalize its shape after each UI param change - indicator is slow on TFs with long history 10000+ bars - Volume Profile/Value Area are calculated for a given range and updated on each bar. Each level has a fixed width. Offsets control visible level parts. Side Cover hides the invisible parts. - Custom Color for POC/VA/VWAP levels - UI Style color/transparency can only change shape's color and doesn't affect textcolor, hence this additional option - Custom Widh for levels - UI Style supports only width <= 4, hence this additional option - POC is visible in both modes. In VWAP mode Developing POC becomes VWAP, VA High and Low => VWAP High and Low correspondingly to minimize the number of plot outputs - You can't change buy/sell level colors (only plot transparency) - this requires 2x plot outputs exceeding max 64 limit. That's why 2 additional plots are used to dim the non Value Area zones - Use Side by Side view to compare buy and sell volumes between each other: base width = max(total_buy_vol, total_sell_vol) - All buy/sell volume lengths are calculated as % of a fixed base width = 100 bars (100%). You can't set show_last from input - Sell Offset is calculated relative to Buy Offset to stack/extend sell on top of buy. Buy Offset = Zero - Buy Length. Sell Offset = Buy Offset - Sell Length = Zero - Buy Length - Sell Length - If you see "loop too long error" - change some values in UI and it will recalculate - no need to refresh the chart - There's no such thing as buy/sell volume, there's just volume, but for the purposes of the Volume Profile method, assume: bull candle = buy volume, bear candle = sell volume - Volume Profile Range is limited to 5000 bars for free accounts P.S. Cantaloupia Will be Free! Links on Volume Profile and Value Area calculation and usage: www.tradingview.com stockcharts.com onlinelibrary.wiley.com
Pine Script® Indikator
von RagingRocketBull
33
Extreme Zone Volume ProfileExtreme Zone Volume Profile (EZVP) Originality & Innovation The Extreme Zone Volume Profile (EZVP) revolutionizes traditional volume profile analysis by applying statistical zone classification to volume distribution. Unlike standard volume profiles that display raw volume data, EZVP segments the price range into statistically meaningful zones based on percentile thresholds, allowing traders to instantly identify where volume concentration suggests strong support/resistance versus areas of potential breakout. Technical Methodology Core Algorithm: Distributes volume across user-defined bins (20-200) over a lookback period Calculates volume-weighted price levels for each bin Applies percentile-based zone classification to the price range (not volume ranking) Zone B (extreme zones): Outer percentile tails representing potential rejection areas Zone A (significant zones): Secondary percentile bands indicating strong interest levels Center Zone: Bulk trading range where most price discovery occurs Mathematical Foundation: The script uses price-range percentiles rather than volume percentiles. If the total price range is divided into 100%, Zone B captures the extreme price tails (default 2.5% each end ≈ 2 standard deviations), Zone A captures the next significant bands (default 14% each ≈ 1 standard deviation), leaving the center for normal distribution trading. Key Calculations: POC (Point of Control): Price level with maximum volume accumulation Volume-weighted mean price: Total volume × price / total volume Median price: Geometric center of the price range Rightward-projected bars: Volume bars extend forward from current time to avoid historical chart clutter Trading Applications Zone Interpretation: Zone B (Red/Green): Extreme price levels where volume suggests strong rejection potential. Price reaching these zones often indicates overextension and possible reversal points. Zone A (Orange/Teal): Significant support/resistance areas with substantial volume interest. These levels often act as intermediate targets or consolidation zones. Center (Gray): Fair value area where most trading occurs. Price tends to return to this range during normal market conditions. Strategic Usage: Reversal Trading: Look for rejection signals when price enters Zone B areas Breakout Confirmation: Volume expansion beyond Zone B boundaries suggests genuine breakouts Support/Resistance: Zone A boundaries often provide reliable entry/exit levels Mean Reversion: Price tends to gravitate toward the volume-weighted mean and POC lines Unique Value Proposition EZVP addresses three key limitations of traditional volume profiles: Visual Clarity: Standard profiles can be cluttered and difficult to interpret quickly. EZVP's color-coded zones provide instant visual feedback about price significance. Statistical Framework: Rather than relying on subjective interpretation of volume nodes, EZVP applies objective percentile-based classification, making support/resistance identification more systematic. Forward-Looking Display: Rightward-projecting bars keep historical price action clean while maintaining current market structure visibility. Configuration Guide Lookback Period (10-1000): Controls the historical depth of volume calculation. Shorter periods for intraday scalping, longer for swing trading. Number of Bins (20-200): Resolution of volume distribution. Higher values provide more granular analysis but may create noise on lower timeframes. Zone Percentages: Zone B: Extreme threshold (default 2.5% = ~2σ statistical significance) Zone A: Significant threshold (default 14% = ~1σ statistical significance) Visual Controls: Toggle individual elements (POC, median, mean, zone lines) to customize display complexity for your trading style. Technical Requirements Pine Script v6 compatible Maximum bars back: 5000 (ensures sufficient historical data) Maximum boxes: 500 (supports high-resolution bin counts) Maximum lines: 50 (accommodates all zone and reference lines) This indicator synthesizes volume profile theory with statistical zone analysis, providing a quantitative framework for identifying high-probability support/resistance levels based on volume distribution patterns rather than arbitrary price levels.
Pine Script® Indikator
von NateRichmond
1
Volume Range Profile with Fair Value (Zeiierman)█ Overview The Volume Range Profile with Fair Value (Zeiierman) is a precision-built volume-mapping tool designed to help traders visualize where institutional-level activity is occurring within the price range — and how that volume behavior shifts over time. Unlike traditional volume profiles that rely on fixed session boundaries or static anchors, this tool dynamically calculates and displays volume zones across both the upper and lower ends of a price range, revealing point-of-control (POC) levels, directional volume flow, and a fair value drift line that updates live with each candle. You’re not just looking at volume anymore. You’re dissecting who’s in control — and at what price. ⚪ In simple terms: Upper Zone = The upper portion of the price range, showing concentrated volume activity — typically where selling or distribution may occur Lower Zone = The lower portion of the price range, highlighting areas of high volume — often associated with buying or accumulation POC Bin = The bin (price level) with the highest traded volume in the zone — considered the most accepted price by the market Fair Value Trend = A dynamic trend line tracking the average POC price over time — visualizing the evolving fair value Zone Labels = Display real-time breakdown of buy/sell volume within each zone and inside the POC — revealing who’s in control █ How It Works ⚪ Volume Zones Upper Zone: Anchored at the highest high in the lookback period Lower Zone: Anchored at the lowest low in the lookback period Width is user-defined via % of range Each zone is divided into a series of volume bins ⚪ Volume Bins (Histograms) Each zone is split into N bins that show how much volume occurred at each level: Taller = More volume The POC bin (Point of Control) is highlighted Labels show % of volume in the POC relative to the whole zone ⚪ Buy vs Sell Breakdown Each volume bin is split by: Buy Volume = Close ≥ Open Sell Volume = Close < Open The script accumulates these and displays total Buy/Sell volume per zone. ⚪ Fair Value Drift Line A POC trend is plotted over time: Represents where volume was most active across each range Color changes dynamically — green for rising, red for falling Serves as a real-time fair value anchor across changing market structure █ How to Use ⚪ Identify Key Control Zones Use Upper/Lower Zone structures to understand where supply and demand is building. Zones automatically adapt to recent highs/lows and re-center volume accordingly. ⚪ Follow Institutional Activity Watch for POC clustering near price tops or bottoms. Large volumes near extremes may indicate accumulation or distribution. ⚪ Spot Fair Value Drift The fair value trend line (average POC price) gives insight into market equilibrium. One strategy can be to trade a re-test of the fair value trend, trades are taken in the direction of the current trend. █ Understanding Buy & Sell Volume Labels (Zone Totals) These labels show the total buy and sell volume accumulated within each zone over the selected lookback period: Buy Vol (green label) → Total volume where candles closed bullish Sell Vol (red label) → Total volume where candles closed bearish Together, they tell you which side dominated: Higher Buy Vol → Bullish accumulation zone Higher Sell Vol → Bearish distribution zone This gives a quick visual insight into who controlled the zone, helping you spot areas of demand or supply imbalance. █ Understanding POC Volume Labels The POC (Point of Control) represents the price level where the most volume occurred within the zone. These labels break down that volume into: Buy % – How much of the volume was buying (price closed up) Sell % – How much was selling (price closed down) Total % – How much of the entire zone’s volume happened at the POC Use it to spot strong demand or supply zones: High Buy % + High Total % → Strong buying interest = likely support High Sell % + High Total % → Strong selling pressure = likely resistance It gives a deeper look into who was in control at the most important price level. █ Why It’s Useful Track where fair value is truly forming Detect aggressive volume accumulation or dumping Visually split buyer/seller control at the most relevant price levels Adapt volume structures to current trend direction █ Settings Explained Lookback Period: Number of bars to scan for highs/lows. Higher = smoother zones, Lower = reactive. Zone Width (% of Range): Controls how much of the range is used to define each zone. Higher = broader zones. Bins per Zone: Number of volume slices per zone. Higher = more detail, but heavier on resources. ----------------- Disclaimer The content provided in my scripts, indicators, ideas, algorithms, and systems is for educational and informational purposes only. It does not constitute financial advice, investment recommendations, or a solicitation to buy or sell any financial instruments. I will not accept liability for any loss or damage, including without limitation any loss of profit, which may arise directly or indirectly from the use of or reliance on such information. All investments involve risk, and the past performance of a security, industry, sector, market, financial product, trading strategy, backtest, or individual's trading does not guarantee future results or returns. Investors are fully responsible for any investment decisions they make. Such decisions should be based solely on an evaluation of their financial circumstances, investment objectives, risk tolerance, and liquidity needs.
Pine Script® Indikator
von Zeiierman
13
TPO[Fixed Range, Anchored, Bars Back]TPO Bars Back, Fixed Range and Anchored Overview The TPO Profile (Time Price Opportunity Profile) is a powerful market profile indicator that displays the amount of time price spent at different levels during a specified period. Unlike traditional volume profile indicators that show volume distribution, TPO Profile shows time distribution , providing insights into where price has spent the most time and identifying key support and resistance levels. Key Advantages Over TradingView's Built-in TPO Simplified Composite Creation : Automatically creates TPO profiles for any time range without manual split/merge operations Instant Value Area Calculation : Immediately shows Value Area, POC, VAH, and VAL for your selected period No Manual Assembly Required : TradingView's native TPO requires you to manually split sessions and merge them to create composites - this indicator does it automatically Flexible Time Ranges : Create composites for any custom time period (multiple days, weeks, specific events) with a few clicks Real-time Composite Updates : Anchor mode creates live composites that update as new data arrives Multiple Composite Analysis : Easily compare different time periods without the tedious manual process Key Features Core Functionality Time-Based Analysis : Shows time spent at each price level rather than volume Configurable Time Blocks : Use any timeframe for TPO counting (30min, 1H, 4H, etc.) Multiple Price Levels : Adjustable from 5 to 200 levels for granular analysis Point of Control (POC) : Automatically identifies the price level with highest time activity Value Area Calculation : Shows the price range containing 70% (configurable) of time activity Automatic Composite Generation : Creates multi-session composites without manual intervention Three Operating Modes 1. Bars Back Mode Analyzes the last N bars from the current bar Perfect for recent market activity analysis Range: 10-500 bars Use Case : Intraday analysis, recent session review 2. Fixed Range Mode Analyzes a specific time period between start and end times Ideal for historical analysis of specific events Creates perfect composites for multi-day periods Use Case : Earnings periods, news events, specific trading sessions, weekly/monthly composites 3. Anchor Mode (NEW) Starts from a specific time and extends to the current bar Dynamically updates as new bars form Perfect for building live composites from any starting point Use Case : Live session monitoring, event-based analysis from a specific point, growing composites Visual Elements TPO Bars Horizontal bars showing time distribution at each price level Longer bars = more time spent at that level Color-coded to distinguish Value Area from outlying levels Point of Control (POC) Red line marking the price level with highest time activity Most significant support/resistance level Configurable line style (Solid/Dashed/Dotted) and width Value Area High/Low (VAH/VAL) Green and Orange lines marking the boundaries of the Value Area Shows the price range containing the specified percentage of time activity Optional display with customizable line styles Single Print Detection Identifies price levels touched by only one time block Display options: Lines or Boxes Purple color highlighting these significant levels Often act as strong support/resistance in future trading Customization Options Time Block Configuration Block Time : Choose timeframe for TPO counting (30min, 1H, 4H, etc.) Allows analysis at different time granularities Higher timeframes = broader perspective, Lower timeframes = finer detail Visual Styling Line Styles : Solid, Dashed, or Dotted for all line elements Line Widths : 1-5 pixels for POC, VAH, and VAL lines Colors : Fully customizable colors for all elements Transparency : Adjustable transparency for better chart readability Label Management Show/Hide Labels : Toggle POC, VAH, VAL labels Font Sizes : Tiny, Small, Normal, Large, Huge Label Positioning : 8 different position options relative to lines Offset Controls : Fine-tune label positioning Line Extension Level Offset Right : Controls how far lines extend Smart extension logic: Value ≤ 0: Infinite extension (extend.right) Value ≥ 1: Extends exactly N bars ahead Trading Applications Support & Resistance POC often acts as strong support/resistance Value Area boundaries provide key levels Single prints frequently become significant levels Market Structure Analysis Identify areas of price acceptance (thick TPO bars) Spot areas of price rejection (thin TPO bars) Understand where market participants are comfortable trading Composite Profile Analysis Create multi-day, weekly, or monthly composites instantly Compare different composite periods without manual work Analyze longer-term price acceptance levels Build composites around specific events or announcements Session Analysis Monitor intraday session development in real-time Compare different sessions (London, New York, Asia) Track how profiles change throughout the trading day Build live composites across multiple sessions Event Analysis Use Fixed Range mode for earnings, news events Use Anchor mode to track price development from specific events Compare pre/post event price acceptance levels Create event-based composites automatically Input Parameters Mode Selection Mode : Bars Back | Fixed Range | Anchor Bars Back : Number of bars to analyze (10-500) Start Time : Beginning time for Fixed Range and Anchor modes End Time : Ending time for Fixed Range mode only Analysis Configuration Block Time : Timeframe for TPO blocks (e.g., "30" for 30-minute blocks) TPO Levels : Number of price levels (5-200) Value Area % : Percentage for Value Area calculation (50-95%) Display Options Show POC : Display Point of Control line Show Value Area : Display Value Area box Show VAH/VAL Lines : Display Value Area boundary lines Show Single Prints : Display single print detection Single Print Style : Lines or Boxes Styling Controls Colors : TPO, POC, Value Area, VAH, VAL, Single Print colors Line Styles : POC, VAH, VAL line styles Line Widths : POC, VAH, VAL line widths Labels : Show/hide, font size, position, offset controls Technical Details Calculation Method Divides the price range into equal levels based on TPO Levels setting For each time block, determines which price levels it crosses Adds +1 count to each crossed level Identifies POC as the level with highest count Calculates Value Area by expanding from POC until target percentage is reached Performance Considerations Historical data limited to prevent buffer overflow errors Smart bounds checking for different timeframes Optimized cleanup routines to prevent drawing object accumulation Pine Script Version Built on Pine Script v6 Uses modern Pine Script best practices Efficient array handling and drawing object management Best Practices Timeframe Selection Block Time = Chart Timeframe : Traditional TPO approach Block Time > Chart Timeframe : Smoother, broader perspective Block Time < Chart Timeframe : More granular, detailed analysis Level Count Guidelines Low levels (10-20) : Better for swing trading, major levels High levels (50-100) : Better for scalping, precise entries Very high levels (100+) : For very detailed analysis Mode Selection Bars Back : Daily analysis, recent activity Fixed Range : Historical events, specific periods, manual composites Anchor : Live monitoring, event-based analysis, growing composites Composite Creation Workflow Select Fixed Range or Anchor mode Set your desired start time (and end time for Fixed Range) Adjust TPO Levels for desired granularity Enable VAH/VAL lines to see Value Area boundaries The composite profile generates automatically with all key levels This indicator eliminates the tedious manual process of creating composite TPO profiles in TradingView. Instead of splitting sessions and manually merging them, you get instant composite analysis with automatic Value Area calculation, POC identification, and single print detection. The combination of time-based analysis, multiple operating modes, and extensive customization options makes it a powerful tool for understanding market structure and price acceptance levels across any time period.
Pine Script® Indikator
von mindyourbuisness
27
Swing Volume Profiles [LuxAlgo]The Swing Volume Profiles indicator aims to calculate and highlight trading activity at specific price levels between two swing points; allowing traders to reveal dominant and/or significant price levels based on volume. By measuring traded volume at all price levels in the market over a specified time period, the script can also be used to detect some key analysis generally such as supply & demand, buy-side & sell-side liquidity levels, unfilled liquidity voids, and imbalances that can highlight on the chart. 🔶 USAGE A volume profile is an advanced charting tool that displays the traded volume at different price levels over a specific period. It helps you visualize where the majority of trading activity has occurred. Key Levels are the areas where the volume is concentrated or where there are significant volume spikes. These levels are known as key support and resistance levels. High-volume nodes indicate areas of high activity and are likely to act as support or resistance in the future. Volume profile also helps identify value areas, which represent the price levels where the most trading activity has taken place. These levels can act as areas of support or resistance as traders perceive them as fair value. The Point of Control describes the price level where the most volume was traded. A Naked Point of Control (also called a Virgin Point of Control) is a previous POC that has not been traded. Extending PoC options 'Until Bar Cross' or 'Until Bar Touch' helps in identifying Naked Point of Control Lines. Previous PoC levels can serve as support and resistance for future price movements. Extending PoC Level 'Until Last Bar' option will help to identify such levels. 🔶 DETAILS One of the unique features of the script is its ability to detect some other key levels such as levels of acceptance and rejection. Levels of rejection we may summarize as supply and demand levels, these are also referred to as buy-side and sell-side liquidity levels. They usually occur at extreme highs or lows, where prices may be too high for buyers (high supply, low demand) or too low for sellers (low supply, high demand) Levels of acceptance are the levels where Liquidity Voids occur, these are also referred to imbalances. Liquidity voids are sudden changes in price when the price jumps from one level to another. The peculiar thing about liquidity voids is that they almost always fill up, so we call them levels of acceptance. 🔶 ALERTS When an alert is configured, the user will have the ability to be notified in case: Point Of Control Line is touched/crossed Value Area High Line is touched/crossed Value Area Low Line is touched/crossed 🔶 SETTINGS 🔹 Display Options Mode: Controls the lookback length of detection and visualization, where Present assumes last X bars specifid in '# Bars' option and Historical assumes all data available to the user as well as allowed limits of visiual objects (boxs, lines, labels etc) # Bars: Controls the lookback length. 🔹 Swing Volume Profiles The script takes into account user-defined parameters and plots volume profiles. Due to Pine Script™ drwaing objects limit only total volume profiles are presented. Swing Detection Length: Lookback period Swing Volume Profiles: Toggles the visibility of the Volume Profiles, with color options to differentiate the Value Area within a profile. Profile Range Background Fill: Toggles the visibility of the Volume Profiles Range 🔹 Point of Control (PoC) Point of Control (POC) – The price level for the time period with the highest traded volume Point of Control (PoC): Toggles the visibility of the Point of Control Developing PoC: Toggles the visibility of the Developing PoC Extend PoC: Option that allows detecting virgin PoC levels. Virgin Point of Control (VPoC) is defined as a Point of Control that has never been revisited or touched. The option also allows PoC levels to extend till the last bar aiming to present levels from history where the levels were traded significantly and those levels can be used as support and resistance levels. 🔹 Value Area (VA) Value Area (VA) – The range of price levels in which the specified percentage of all volume was traded during the time period. Value Area Volume %: Specifies percentage of the Value Area Value Area High (VAH): Toggles the visibility of the Value Area High, the highest price level within the Value Area Value Area Low (VAL): Toggles the visibility of the Value Area Low, the lowest price level within the Value Area Value Area (VA) Background Fill: Toggles the visibility of the Value Area Range 🔹 Liquidity Levels / Voids Unfilled Liquidity, Thresh: Enable display of the Unfilled Liquidity Levels and Liquidity Voids, where threshold value defines the significance of the level. 🔹 Profile Stats Position, Size: Specifies the position and the size of the label presenting Profile Stats, the tooltip of the label includes all related info for each profile. Price, Price Change, and Cumulative Volume: Enable display of the given options on the chart. 🔹 Volume Profile Others Number of Rows: Specify how many rows each histogram will have. Caution, having it set to high values will quickly hit Pine Script™ drawing objects limit and may cause fewer historical profiles to be displayed. Placement: Place profile either left or right. Profile Width %: Alters the width of the rows in the histogram, relative to the calculated profile length. 🔶 RELATED SCRIPTS Alternative Liquidity Void Detection script, Buyside-Sellside-Liquidity
Pine Script® Indikator
von LuxAlgo
35
Volume Profile Heatmap [UAlgo]The "Volume Profile Heatmap " indicator is a tool designed to visualize the distribution of trading volume across different price levels over a specified period. This heatmap-style indicator helps traders identify significant price levels where a high volume of trading activity has occurred, which can be crucial for making informed trading decisions. The indicator divides the price range into multiple levels and calculates the volume of trades occurring at each level, presenting this data in a visually intuitive manner using a gradient of colors. By analyzing the volume profile, traders can gain insights into areas of support and resistance, as well as the Point of Control (POC)—the price level with the highest traded volume. This information is valuable in assessing market sentiment, potential reversal points, and key areas of interest where price action might consolidate or react. 🔶 Key Features Customizable Analysis Period: The indicator allows users to specify the analysis period, defining the historical range over which the volume profile is calculated. Adjustable Number of Levels: Users can set the number of price levels to divide the price range, offering flexibility in the granularity of the volume analysis. Color-Coded Heatmap: The indicator uses a gradient color scheme to visually represent volume intensity at each price level. Higher volume areas are shaded differently than lower volume areas, making it easy to spot significant price levels. Opacity Control: Users can adjust the opacity of the volume boxes, enabling a clearer or more subtle visualization according to their preferences. Point of Control (POC) Display: The indicator highlights the Point of Control, the price level with the highest traded volume, with a distinct line on the chart, allowing traders to easily identify this critical level. 🔶 Disclaimer Use with Caution: This indicator is provided for educational and informational purposes only and should not be considered as financial advice. Users should exercise caution and perform their own analysis before making trading decisions based on the indicator's signals. Not Financial Advice: The information provided by this indicator does not constitute financial advice, and the creator (UAlgo) shall not be held responsible for any trading losses incurred as a result of using this indicator. Backtesting Recommended: Traders are encouraged to backtest the indicator thoroughly on historical data before using it in live trading to assess its performance and suitability for their trading strategies. Risk Management: Trading involves inherent risks, and users should implement proper risk management strategies, including but not limited to stop-loss orders and position sizing, to mitigate potential losses. No Guarantees: The accuracy and reliability of the indicator's signals cannot be guaranteed, as they are based on historical price data and past performance may not be indicative of future results.
Pine Script® Indikator
von UAlgo
Volume Profile with Node Detection [LuxAlgo]The Volume Profile with Node Detection is a charting tool that allows visualizing the distribution of traded volume across specific price levels and highlights significant volume nodes or clusters of volume nodes that traders may find relevant in utilizing in their trading strategies. 🔶 USAGE The volume profile component of the script serves as the foundation for node detection while encompassing all the essential features expected from a volume profile. See the sub-sections below for more detailed information about the indicator components and their usage. 🔹 Peak Volume Node Detection A volume peak node is identified when the volume profile nodes for the N preceding and N succeeding nodes are lower than that of the evaluated one. Displaying peak volume nodes along with their surrounding N nodes (Zones or Clusters) helps visualize the range, typically representing consolidation zones in the market. This feature enables traders to identify areas where trading activity has intensified, potentially signaling periods of price consolidation or indecision among market participants. 🔹 Trough Volume Node Detection A volume trough node is identified when the volume profile nodes for the N preceding and N succeeding nodes are higher than that of the evaluated one. 🔹 Highest and Lowest Volume Nodes Both the highest and lowest volume areas play significant roles in trading. The highest volume areas typically represent zones of strong price acceptance, where a significant amount of trading activity has occurred. On the other hand, the lowest volume areas signify price levels with minimal trading activity, often indicating zones of price rejection or areas where market participants have shown less interest. 🔹 Volume profile Volume profile is calculated based on the volume of trades that occur at various price levels within a specified timeframe. It divides the price range into discrete price intervals, typically known as "price buckets" or "price bars," and then calculates the total volume of trades that occur at each price level within those intervals. This information is then presented graphically as a histogram or profile, where the height of each bar represents the volume of trades that occurred at that particular price level. 🔶 SETTINGS 🔹 Volume Nodes Volume Peaks: Toggles the visibility of either the "Peaks" or "Clusters" on the chart, depending on the specified percentage for detection. Node Detection Percent %: Specifies the percentage for the Volume Peaks calculation. Volume Troughs: Toggles the visibility of either the "Troughs" or "Clusters" on the chart, depending on the specified percentage for detection. Node Detection Percent %: Specifies the percentage for the Volume Troughs calculation. Volume Node Threshold %: A threshold value specified as a percentage is utilized to detect peak/trough volume nodes. If a value is set, the detection will disregard volume node values lower than the specified threshold. Highest Volume Nodes: Toggles the visibility of the highest nodes for the specified count. Lowest Volume Nodes: Toggles the visibility of the lowest nodes for the specified count. 🔹 Volume Profile - Components Volume Profile: Toggles the visibility of the volume profile with either classical display or gradient display. Value Area Up / Down: Color customization option for the volume nodes within the value area of the profile. Profile Up / Down Volume: Color customization option for the volume nodes outside of the value area of the profile. Point of Control: Toggles the visibility of the point of control, allowing selection between "developing" or "regular" modes. Sets the color and width of the point of control line accordingly. Value Area High (VAH): Toggles the visibility of the value area high level and allows customization of the line color. Value Area Low (VAL): Toggles the visibility of the value area low level and allows customization of the line color. Profile Price Labels: Toggles the visibility of the Profile Price Levels and allows customization of the text size of the levels. 🔹 Volume Profile - Display Settings Profile Lookback Length: Specifies the length of the profile lookback period. Value Area (%): Specifies the percentage for calculating the value area. Profile Placement: Specify where to display the profile. Profile Number of Rows: Specify the number of rows the profile will have. Profile Width %: Adjusts the width of the rows in the profile relative to the profile range. Profile Horizontal Offset: Adjusts the horizontal offset of the profile when it is selected to be displayed on the right side of the chart. Value Area Background: Toggles the visibility of the value area background and allows customization of the fill color. Profile Background: Toggles the visibility of the profile background and allows customization of the fill color. 🔶 RELATED SCRIPTS Supply-Demand-Profiles Liquidity-Sentiment-Profile Thanks to our community for recommending this script. For more conceptual scripts and related content, we welcome you to explore by visiting >>> LuxAlgo-Scripts .
Pine Script® Indikator
von LuxAlgo
39
Volume HeatMap With Profile [ChartPrime]The Volume Heatmap with Profile indicator is a tool designed to provide traders with a comprehensive view of market activity through customizable visualizations. This indicator goes beyond traditional volume analysis by offering a range of adjustable parameters and features that enhance analysis of volume and give a cleaner experience when analyzing it. To get started click the start and end time for the profile. Key Features: Extended Calculation: This indicator extends its calculation to the last bar, ensuring that the user has insights into current market dynamics. Point of Control (POC): Easily identify the price level at which the highest trading activity has occurred, helping the user pinpoint potential reversal points and significant support/resistance zones. VWAP Point of Control: Display the Volume Weighted Average Price (VWAP) Point of Control, giving the user a clear reference for determining the average price traders are paying and potential price reversals. Adjustable Colors for Heatmap: Change the heatmap colors to the users preference, allowing the user to match the indicator's appearance to their chart style and personal visual preferences. Forecasted Zone: This feature allows traders to forecast areas of high activity by providing the option to adjust colors within this zone. This feature assists in identifying potential breakouts or areas where increased trading volume is anticipated. Volume Profile: Customize the colors of the volume profile to make it distinct and easily distinguishable on the chart. Adjustable Volume Levels: Specify the number volume levels that are most relevant to your trading strategy. Adjustable Placement for Volume Profile: Position the volume profile on the chart. Whether the user prefers it on the left, right, or at the center of the chart, this indicator offers placement flexibility. The ratio of bull vs bear volume is plotted on the outside of the range indicating how bullish or bearish price action is in a given range.
Pine Script® Indikator
von ChartPrime
6
Volume Voids [theUltimator5]Volume Voids highlights price regions with no or unusually thin participation over a chosen lookback. It bins the lookback’s full price range into equal steps, assigns each bar’s close to a bin, and accumulates volume per bin. Contiguous runs of zero-volume bins are shown as “voids,” while low-volume runs (below a dynamic threshold) mark thin-liquidity “corridors” where price often traverses quickly when revisited. An optional PoC (Point of Control) line marks the mid-price of the highest-volume bin—commonly treated as a recent “value” area that price may revisit. What it draws on your chart Histogram (optional): Right-anchored horizontal volume-by-price bars built from your lookback and bin count. Bars tint green→red via a simple delta proxy (up-bar volume minus down-bar volume) to hint at directional participation inside each price band. Point of Control (optional): A horizontal line at the highest-volume bin’s mid-price (the PoC). Zero-Volume Voids: Translucent boxes where no bin volume printed within the window (detected between the first and last non-empty bins ). Low-Volume Zones: Translucent boxes where bin volume is below a dynamic threshold (see formula below), often acting like low-friction corridors. How it works Slice the lookback’s high→low into N equal price bins. Assign each bar’s closing price to a bin and add that bar’s volume to the bin total. A simple up/down-bar delta proxy drives the histogram’s tinting. PoC = bin with the maximum accumulated volume. Zero-Volume Voids = contiguous runs of bins with exactly zero volume (bounded by the first/last occupied bins). Low-Volume Zones = contiguous runs of bins with volume below: threshold = total_window_volume ÷ (divisor × number_of_bins) Lower divisor → more LV boxes; higher divisor → stricter/fewer boxes. Note: This is a lightweight, chart-native approximation of a volume profile. Volume is binned by bar close (not by tick-level prints or intrabar distribution), so “voids”/“thin” areas reflect this approximation. Key inputs Lookback Period: Window for calculations. Number of Volume Boxes (bins): Histogram resolution. PoC / Show Histogram / Anchor to Right Side: Visibility and layout controls. Low-Volume Threshold Divisor: Sensitivity for LV detection. Colors & Labels: Customize zero-volume / low-volume box colors and optional labels with offsets. How to use (educational, not signals) Context: High-volume = acceptance; thin/zero-volume = inefficiency. Price often rotates near acceptance and moves faster through thin areas. Revisits: On returns to prior voids/LV zones, watch for accelerated moves or fills; PoC can serve as a balance reference. Confluence: Pair with trend tools (e.g., ADX), VWAP/session markers, or structure levels for timing and risk. Limitations & performance Bins use closing price only; intrabar distribution is not modeled. Detections refresh on the live bar; visuals can be heavy on large lookbacks/high bin counts—reduce bins/lookback or hide labels if needed.
Pine Script® Indikator
von TheUltimator5
Yelober - Market Internal direction+ Key levelsYelober – Market Internals + Key Levels is a focused intraday trading tool that helps you spot high-probability price direction by anchoring decisions to structure that matters: yesterday’s RTH High/Low, today’s pre-market High/Low, and a fast Value Area/POC from the prior session. Paired with a compact market internals dashboard (NYSE/NASDAQ UVOL vs. DVOL ratios, VOLD slopes, TICK/TICKQ momentum, and optional VIX trend), it gives you a real-time read on breadth so you can choose which direction to trade, when to enter (breaks, retests, or fades at PMH/PML/VAH/VAL/POC), and how to plan exits as internals confirm or deteriorate. On top of these intraday decision benefits, it also allows traders—in a very subtle but powerful way—to keep an eye on the VIX and immediately recognize significant spikes or sharp decreases that should be factored in before entering a trade, or used as a quick signal to modify an existing position. In short: clear levels for the chart, live internals for the context, and a smarter, rules-based path to execution. # Yelober – Market Internals + Key Levels *A TradingView indicator for session key levels + real‑time market internals (NYSE/NASDAQ TICK, UVOL/DVOL/VOLD, and VIX).* **Script name in Pine:** `Yelober - Market Internal direction+ Key levels` (Pine v6) --- ## 1) What this indicator does **Purpose:** Help intraday traders quickly find high‑probability reaction zones and read market internals momentum without switching charts. It overlays yesterday/today’s **automatic price levels** on your active chart and shows a **market breadth table** that summarizes NYSE/NASDAQ buying pressure and TICK direction, with an optional VIX trend read. ### Key features at a glance * **Automatic Price Levels (overlay on chart)** * Yesterday’s High/Low of Day (**yHoD**, **yLoD**) * Extended Hours High/Low (**yEHH**, **yEHL**) across yesterday AH + today pre‑market * Today’s Pre‑Market High/Low (**PMH**, **PML**) * Yesterday’s **Value Area High/Low** (**VAH/VAL**) and **Point of Control (POC)** computed from a volume profile of yesterday’s **regular session** * Smart de‑duplication: * Shows **only the higher** of (yEHH vs PMH) and **only the lower** of (yEHL vs PML) to avoid redundant bands * **Market Breadth Table (on‑chart table)** * **NYSE ratio** = UVOL/DVOL (signed) with **VOLD slope** from session open * **NASDAQ ratio** = UVOLQ/DVOLQ (signed) with **VOLDQ slope** from session open * **TICK** and **TICKQ**: live cumulative ratio and short‑term slope * **VIX** (optional): current value + slope over a configurable lookback/timeframe * Color‑coded trends with sensible thresholds and optional normalization --- ## 2) How to use it (trader workflow) 1. **Mark your reaction zones** * Watch **yHoD/yLoD**, **PMH/PML**, and **VAH/VAL/POC** for first touches, break/retest, and failure tests. * Expect increased responsiveness when multiple levels cluster (e.g., PMH ≈ VAH ≈ daily pivot). 2. **Read the breadth panel for context** * **NYSE/NASDAQ ratio** (>1 = more up‑volume than down‑volume; <−1 = down‑dominant). Strong green across both favors long setups; red favors short setups. * **VOLD slopes** (NYSE & NASDAQ): positive and accelerating → broadening participation; negative → persistent pressure. * **TICK/TICKQ**: cumulative ratio and **slope arrows** (↗ / ↘ / →). Use the slope to gauge **near‑term thrust or fade**. * **VIX slope**: rising VIX (red) often coincides with risk‑off; falling VIX (green) with risk‑on. 3. **Confluence = higher confidence** * Example: Price reclaims **PMH** while **NYSE/NASDAQ ratios** print green and **TICK slopes** point ↗ — consider break‑and‑go; if VIX slope is ↘, that adds risk‑on confidence. * Example: Price rejects **VAH** while **VOLD slopes** roll negative and VIX ↗ — consider fade/reversal. 4. **Risk management** * Place stops just beyond key levels tested; if breadth flips, tighten or exit. > **Timeframes:** Works best on 1–15m charts for intraday. Value Area is computed from **yesterday’s RTH**; choose a smaller calculation timeframe (e.g., 5–15m) for stable profiles. --- ## 3) Inputs & settings (what each option controls) ### Global Style * **Enable all automatic price levels**: master toggle for yHoD/yLoD, yEHH/yEHL, PMH/PML, VAH/VAL/POC. * **Line style/width**: applies to all drawn levels. * **Label size/style** and **label color linking**: use the same color as the line or override with a global label color. * **Maximum bars lookback**: how far the script scans to build yesterday metrics (performance‑sensitive). ### Value Area / Volume Profile * **Enable Value Area calculations** *(on by default)*: computes yesterday’s **POC**, **VAH**, **VAL** from a simplified intraday volume profile built from yesterday’s **regular session bars**. * **Max Volume Profile Points** *(default 50)*: lower values = faster; higher = more precise. * **Value Area Calculation Timeframe** *(default 15)*: the security timeframe used when collecting yesterday’s highs/lows/volumes. ### Individual Level Toggles & Colors * **yHoD / yLoD** (yesterday high/low) * **yEHH / yEHL** (yesterday AH + today pre‑market extremes) * **PMH / PML** (today pre‑market extremes) * **VAH / VAL / POC** (yesterday RTH value area + point of control) ### Market Breadth Panel * **Show NYSE / NASDAQ / VIX**: choose which series to display in the table. * **Table Position / Size / Background Color**: UI placement and legibility. * **Slope Averaging Periods** *(default 5)*: number of recent TICK/TICKQ ratio points used in slope calculation. * **Candles for Rate** *(default 10)* & **Normalize Rate**: VIX slope calculation as % change between `now` and `n` candles ago; normalize divides by `n`. * **VIX Timeframe**: optionally compute VIX on a higher TF (e.g., 15, 30, 60) for a smoother regime read. * **Volume Normalization** (NYSE & NASDAQ): display VOLD slopes scaled to `tens/thousands/millions/10th millions` for readable magnitudes; color thresholds adapt to your choice. --- ## 4) Data sources & definitions * **UVOL/VOLD (NYSE)** and **UVOLQ/DVOLQ/VOLDQ (NASDAQ)** via `request.security()` * **Ratio** = `UVOL/DVOL` (signed; negative when down‑volume dominates) * **VOLD slope** ≈ `(VOLD_now − VOLD_open) / bars_since_open`, then normalized per your setting * **TICK/TICKQ**: cumulative sum of prints this session with **positives vs negatives ratio**, plus a simple linear regression **slope** of the last `N` ratio values * **VIX**: value and slope across a user‑selected timeframe and lookback * **Sessions (EST/EDT)** * **Regular:** 09:30–16:00 * **Pre‑Market:** 04:00–09:30 * **After Hours:** 16:00–20:00 * **Extended‑hours extremes** combine **yesterday AH** + **today PM** > **Note:** All session checks are done with TradingView’s `time(…,"America/New_York")` context. If your broker’s RTH differs (e.g., futures), adjust expectations accordingly. --- ## 5) How the algorithms work (plain English) ### A) Key Levels * **Yesterday’s RTH High/Low**: scans yesterday’s bars within 09:30–16:00 and records the extremes + bar indices. * **Extended Hours**: scans yesterday AH and today PM to get **yEHH/yEHL**. Script shows **either yEHH or PMH** (whichever is **higher**) and **either yEHL or PML** (whichever is **lower**) to avoid duplicate bands stacked together. * **Value Area & POC (RTH only)** * Build a coarse volume profile with `Max Volume Profile Points` buckets across the price range formed by yesterday’s RTH bars. * Distribute each bar’s volume uniformly across the buckets it spans (fast approximation to keep Pine within execution limits). * **POC** = bucket with max volume. **VA** expands from POC outward until **70%** of cumulative volume is enclosed → yields **VAH/VAL**. ### B) Market Breadth Table * **NYSE/NASDAQ Ratio**: signed UVOL/DVOL with basic coloring. * **VOLD Slopes**: from session open to current, normalized to human‑readable units; colors flip green/red based on thresholds that map to your normalization setting (e.g., ±2M for NYSE, ±3.5×10M for NASDAQ). * **TICK/TICKQ Slope**: linear regression over the last `N` ratio points → **↗ / → / ↘** with the rounded slope value. * **VIX Slope**: % change between now and `n` candles ago (optionally divided by `n`). Red when rising beyond threshold; green when falling. --- ## 6) Recommended presets * **Stocks (liquid, intraday)** * Value Area **ON**, `Max Volume Points` = **40–60**, **Timeframe** = **5–15** * Breadth: show **NYSE & NASDAQ & VIX**, `Slope periods` = **5–8**, `Candles for rate` = **10–20**, **Normalize VIX** = **ON** * **Index futures / very high‑volume symbols** * If you see Pine timeouts, set `Max Volume Points` = **20–40** or temporarily **disable Value Area**. * Keep breadth panel **ON** (it’s light). Consider **VIX timeframe = 15/30** for regime clarity. --- ## 7) Tips, edge cases & performance * **Performance:** The volume profile is capped (`maxBarsToProcess ≤ 500` and bucketed) to keep it responsive. If you experience slowdowns, reduce `Max Volume Points`, `Maximum bars lookback`, or disable Value Area. * **Redundant lines:** The script **intentionally suppresses** PMH/PML when yEHH/yEHL are more extreme, and vice‑versa. * **Label visibility:** Use `Label style = none` if you only want clean lines and read values from the right‑end labels. * **Futures/RTH differences:** Value Area is from **yesterday’s RTH** only; for 24h instruments the RTH period may not reflect overnight structure. * **Session transitions:** PMH/PML tracking stops as soon as RTH starts; values persist as static levels for the session. --- ## 8) Known limitations * Uses public TradingView symbols: `UVOL`, `VOLD`, `UVOLQ`, `DVOLQ`, `VOLDQ`, `TICK`, `TICKQ`, `VIX`. If your data plan or region limits any symbol, the corresponding table rows may show `na`. * The VA/POC approximation assumes uniform distribution of each bar’s volume across its high–low. That’s fast but not a tick‑level profile. * Works best on US equities with standard NY session; alternative sessions may need code changes. --- ## 9) Troubleshooting * **“Script is too slow / timed out”** → Lower `Max Volume Points`, lower `Maximum bars lookback`, or toggle **OFF** `Enable Value Area calculations` for that instrument. * **Missing breadth values** → Ensure the symbols above load on your account; try reloading chart or switching timeframes once. * **Overlapping labels** → Set `Label style = none` or reduce label size. --- ## 10) Version / license / contribution * **Version:** Initial public release (Pine v6). * **Author:** © yelober * **License:** Free for community use and enhancement. Please keep author credit. * **Contributing:** Open PRs/ideas: presets, alert conditions, multi‑day VA composites, optional mid‑value (`(VAH+VAL)/2`), session filter for futures, and alertable state machine for breadth regime transitions. --- ## 11) Quick start (TL;DR) 1. Add the indicator and **keep default settings**. 2. Trade **reactions** at yHoD/yLoD/PMH/PML/VAH/VAL/POC. 3. Use the **breadth table**: look for **green ratios + ↗ slopes** (risk‑on) or **red ratios + ↘ slopes** (risk‑off). Check **VIX** slope for confirmation. 4. Manage risk around levels; when breadth flips against you, tighten or exit. --- ### Changelog (public) * **v1.0:** First community release with automatic RTH levels, VA/POC approximation, breadth dashboard (NYSE/NASDAQ/TICK/TICKQ/VIX) with normalization and adaptive color thresholds.
Pine Script® Indikator
von yelober
4
ZigZag Volume Profile [ChartPrime]⯁ OVERVIEW ZigZag Volume Profile combines swing structure with volume analytics by plotting a ZigZag of major price swings and overlaying a detailed volume profile around each swing. At the end of each swing, it highlights the Point of Control (POC) — the price level with the highest traded volume — and extends it forward to identify key areas of potential support or resistance. ⯁ KEY FEATURES ZigZag Swing Detection: Automatically detects swing highs and lows based on a user-defined length, creating clean visual segments of market structure. These segments act as boundaries for volume profile calculations. swingHigh = ta.highest(swingLength) swingLow = ta.lowest(swingLength) ZigZag Channel Visualization: The ZigZag structure is connected with sloped lines, forming a visual “channel” of the price movement. The ZigZag can optionally, scaled by ATR. Volume Profile Around Each Swing: For every completed swing (high to low or low to high), the indicator constructs a full volume profile using user-defined bin counts. It scans volume across price levels in the swing and plots histogram-style bins using a gradient color to indicate volume magnitude. Dynamic Bin Width and Slope Adjustment: Bins are distributed across a vertical ATR-based range, and their width is adjusted based on the percentage of total swing volume. The volume fill direction is adapted to the swing’s slope for visually aligned plotting. POC Detection and Extension: The highest volume bin in each swing is identified as the Point of Control (POC). This level is plotted with a thicker line and extended horizontally into the future as a key reaction level. Automatic POC Expiry on Price Interaction: POC lines are continuously extended unless breached by price. When price crosses the POC level, the extension is terminated — signaling that the level may have been absorbed. Clean Volume Bin Visualization: Bin colors range from green (low volume) to blue (higher volume), with the POC always marked in red by default for easy identification. Volume percentages are optionally labeled at each bin level. Flexible Swing Profile Parameters: Users can control: Number of volume bins Bin width Channel width (ATR factor) Visibility of the swing channel or POC lines Efficient Memory Handling: Old POC lines and volume profiles are automatically removed from memory after a threshold to keep charts clean and performant. ⯁ USAGE Use ZigZag swings to define market structure visually. Analyze volume profile around each swing to understand where most trading activity occurred. Use POC extensions as dynamic support/resistance zones for entries, stops, or take-profits. Watch for price interaction with extended POC lines — breaks may suggest absorbed liquidity or breakout potential. Use the ATR-based channel width to adapt profiles based on market volatility. ⯁ CONCLUSION ZigZag Volume Profile offers a powerful fusion of structure and volume. By plotting detailed volume profiles over each price swing and extending the POC as actionable S/R levels, this tool provides deep insight into market participation zones — giving traders a tactical edge in both ranging and trending environments.
Pine Script® Indikator
von ChartPrime
5